Menu

All products from hiross at a glance!

Adsorptionstrockner Warmregeneration
Hersteller: Hiross
Tandem-Dryer (ATT)
  • High performance compressed air drying system with revolutionary tandem technology
  • Flow rate 2.5 m³/min. up to 34 m³/min. (Larger volume flows on request)
  • Lower operating costs compared to conventional cold and warm regenerating adsorption dryers (lower purge air requirement and lower energy consumption of the heater).
  • Reduced maintenance costs due to lower desiccant filling with increased service life.
  • Constant dew point performance - no peaks above the setpoint.
  • "Dew point control function" for seasonal operation (optional bypass line).
  • Additional energy savings at partial load - (dew point dependent change).
  • Compact overall dimensions - small footprint - space savings.
  • Technology for compressed air and nitrogen can be used
  • Dew point adjustable between -70°C and +3°C
  • Reduced maintenance costs due to lower desiccant filling with increased service life

Wasserabscheider
Hersteller: Hiross
Hiross STH & SFH Water separator
  • Cyclone water separator
  • Flow rate 54 m³ / h to 4020 m³ / h
  • Connection 3/8 "to DN 150
  • Horizontal or vertical arrangement
  • Also available in stainless steel
  • For high or low flow rates
  • The acceptance according to PED (97/23 / EC) is offered by default for all models
  • Other international approvals are available on request.
Downloads
Druckluftfilter
Hersteller: Hiross
Hiross Hyperfilter
Product Features:
• Protects tools and downstream equipment
• Increases efficiency, reduces downtimes
• Significantly reduces maintenance costs
• Full range of models and filtration grades for all industrial applications
• Guaranteed performance levels
• The new look housing features a redesigned inside to reduce pressure drops even further, saving energy


To maintain the air quality standards,  lter elements must be replaced at least every 12 months with
genuine Parker Hiross parts. Annual  lter element changes are therefore essential and ensure:
• Optimal performance is maintained
• Air quality continues to meet international standards
• Low operational costs
• Continued protection of downstream equipments & processes
Failure to perform the scheduled replacement can lead to increasing system pressure Drops.
 
Downloads

Druckluft-Kältetrockner
Hersteller: Hiross
Starlette Plus E (SPE)
  • High Performance compressed air refrigeration dryer
  • For volume flows from 24 m³ / h to 600 m³ / h
  • The series with the lowest CO2 balance on the market
  • The lowest running costs and the lowest power consumption in this area
  • Fully integrated high performance aluminum heat exchanger ("E-Pack", patent pending)
  • Minimal refrigerant charges (average 25% less than comparable rows)
  • Dual frequency pre-equipped for applications at 50 or 60 Hz
  • Digital control unit with these functions:
    • Free contact
    • maintenance reminder
    • Arrester control (time-controlled mode)
    • Wall suspension possible (up to model SPE018)
    • Easy access to the arrester from both sides
    • Compact dimensions
Druckluft-Kältetrockner
Hersteller: Hiross
Tandem Dryer Antares (ATT)
  • High performance compressed air drying system with revolutionary tandem technology
  • Flow rate 2.5 m³/min. up to 34 m³/min. (Larger volume flows on request)
  • Lower operating costs compared to conventional cold and warm regenerating adsorption dryers (lower purge air requirement and lower energy consumption of the heater).
  • Reduced maintenance costs due to lower desiccant filling with increased service life.
  • Constant dew point performance - no peaks above the setpoint.
  • "Dew point control function" for seasonal operation (optional bypass line).
  • Additional energy savings at partial load - (dew point dependent change).
  • Compact overall dimensions - small footprint - space savings.
  • Technology for compressed air and nitrogen can be used
  • Dew point adjustable between -70°C and +3°C
  • Reduced maintenance costs due to lower desiccant filling with increased service life
Druckluft-Kältetrockner
Hersteller: Hiross
Polestar Smart (PST)
  • High performance compressed air refrigeration dryer with energy saving control
  • For flow rates from 720 m³/h to 10800 m³/h
  • Suitable for all compressed air applications
  • Suitable for all compressor types, even with variable flow rates
  • Refrigerated compressed air dryer with the highest energy efficiency for compressed air
  • Lower pressure drops reduce operating costs
  • Reduced cost
  • Significant contribution to the indirect reduction of CO2 emissions to the environment
  • Safe pressure dew point
  • Also available in water-cooled version
Druckluft-Kältetrockner
Hersteller: Hiross
Starlette Plus - High Pressure (SPH)
  • High pressure refrigeration dryer up to 50 bar ü
  • Volume flow 24 m³/h to 131 m³/h
  • reliable airtight reciprocating compressors that do not require preheating
  • simple and safe cooling circuits, which do not have to be readjusted during operation and which are subjected to strict quality checks during their manufacture
  • large condenser and fan rooms, so that even under extreme conditions optimum performance is achieved
  • Safety protection in the cooling circuit, which increases reliability and secures the air dryer as a whole
  • Easy disassembly and easily accessible internal components ensure effective maintenance
  • Condensate separator in a niche, thus easy accessibility without removing the cover plate possible.
Downloads
Druckluft-Kältetrockner
Hersteller: Hiross
Polstar Smart - High Pressure (PSH)
  • High pressure refrigeration dryer up to 50 bar ü
  • Volume flow 180 m³ / h to 7200 m³ / h
  • Suitable for all compressed air applications
  • Suitable for all compressor types, even with variable flow rates
  • Refrigerated compressed air dryer with the highest energy efficiency for compressed air
  • Lower pressure drops reduce operating costs
  • Reduced cost
  • Significant contribution to the indirect reduction of CO2 emissions to the environment
  • Conforms to DIN ISO 7183
  • Refrigerant R 407C
  • Max. Working pressure of 50 bar ü
  • With integrated, time-controlled condensate drain
  • With stainless steel ANSI flanges
  • Pressure dew point +3 ° C
  • Counter flanges, DIN flanges, other models and designs on request
Kaltwassersätze
Hersteller: Hiross
Hyperchill Plus ICEP
  • Chillers for oil and water cooling
  • Cooling capacity from 2 KW to 24 KW
  • Free iron-hydraulic circuit
  • Housing the pump and the tank in the housing of the chiller
  • Electronic controller with proprietary software
  • Low amounts of dirt through the condenser filter
  • Standard installed differential pressure switch
  • Designed with eyebolts (to ICEP014) for easy handling
  • IP54 standard
  • Independent condensation chamber
  • Water and refrigerant pressure gauge
  • Optical level indicator
  • Maximum ambient temperature up to 48 ° C, in tropicalized versions up to 53 ° C
  • PID software
  • Ambient temperature-dependent speed control
Kaltwassersätze
Hersteller: Hiross
Hyperchill ICE
  • Chiller for industrial applications
  • Cooling capacity from 15 KW to 360 KW (larger capacities on request)
  • Water circuit with water tank, evaporator and pump with bypass are a compact and easy to install system
  • Electronic controllers and proprietary software provide access to all system parameters and allow specific intervention for each specific requirement
  • Also available with remote control
  • Fully configurable with numerous options and accessories for the requirements of many industrial processes
  • capacitor filters
  • Independent condensation chamber
  • Construction with easy to maintain accessibility and ease of use
  • Large water tanks minimize temperature fluctuations and allow high-precision temperature control
  • Double independent cooling circuits (from model CE076)
  • Two compressors (from model CE076) and four compressors (from model ICE150) with automatic change
  • Double pumps available as reserve pumps
  • Maximum ambient temperature 45 ° C
  • Oversized capacitors and evaporators
  • Use of flexible scroll compressors (from model ICE022)
Hersteller: Hiross
Baureihe ausgelaufen
Hyperchill Laser HLS
  • Chiller especially for laser applications
  • Cooling capacity from 5 KW to 116 KW (larger capacities on request)
  • Hydraulic circuit of non-ferrous metal, container, evaporator and water pump made of stainless steel, which guarantees the quality of the coolant.
  • High-precision control of the temperature of the escaping water with two hot gas valves (± 0.5 C).
  • PID software, specially developed and tested for the most precise temperature maintenance, even with changing loads.
  • High pressure pumps that ensure constant water supply and constant pressure in the system.
  • The hydraulic circuit with storage and filling tank, evaporator and pump, which form a compact whole and are easy to use and to install.
  • Electronic controllers with proprietary software, which make all key parameters of the unit easily accessible and specific intervention for special requirements, even with remote control.
  • capacitor filters
  • Independent condensation chamber
  • Well accessible concept with easy usability.
  • Low energy consumption due to oversized capacitors and evaporators and by using flexible scroll compressors (from model HLS022).
  • Can be used at ambient temperatures of up to 45 ° C, which prevents standstill even under extremely harsh conditions.
Kaltwassersätze
Hersteller: Hiross
Hyperchill Low Temperature
  • Chiller for particularly low cooling water temperatures
  • Hydraulic circuit: water tank, submerged evaporator and bypass pump provide a compact and easy to install solution.
  • Configurable with low water option for water temperature control down to -10 ° C;
  • Electronic controllers with proprietary software provide access to all system parameters as well as special interventions for special requirements.
  • Available with remote monitoring.
  • Fully configurable with many options and kits to meet the needs of many industrial applications.
  • Capacitor filter.
  • Independent condensation chamber.
  • Optimized design for unrestricted access and easy maintenance.
  • Ambient temperature-dependent speed control of the blower motor ensures a constant power at different temperatures
  • Large water tanks allow a minimum of compressor cycles and precise temperature control of the water.
  • Double independent cooling circuits (from model ICE076).
  • 2 compressors (from model ICE076) and 4 compressors (from model ICE150) with automatic change.
  • Double pumps available as reserve pumps
  • Maximum ambient temperature up to 45 ° C.
  • Oversized capacitors and evaporators.
  • Use of flexible scroll compressors.
Downloads
Nachkühler
Hersteller: Hiross
Hypercool Aftercooler air cooled
  • Significant savings in investment and energy costs
  • Optimized performance of the compressed air system
  • Reduced maintenance and improved product quality
  • Reliable and suitable for continuous operation
  • Very low pressure loss with optimum cooling performance
Downloads
Nachkühler
Hersteller: Hiross
Hypercool Aftercooler water cooled
  • Significant savings in investment and energy costs
  • Optimized performance of the compressed air system
  • Reduced maintenance and improved product quality
  • Reliable and suitable for continuous operation
  • Very low pressure loss with optimum cooling performance