Menu

Breathing Air

Note:

The marked products may be of particular interest to you. They impress by best characteristics, an optimal price-performance ratio or a feature which no other product can offer you. Click on the note and find out more!
Hersteller: Domnick Hunter
domnick hunter BAC-4015
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

The BAC-4015 is a fully pneumatic, portable breathing air purifier designed to provide complete protection for up to four personnel.

At the inlet, a high efficiency coalescing filter reduces oil and water content, an activated carbon filter then removes oil vapour and odours. The third stage of purification is an adsorption dryer that reduces the water vapour content of the compressed air (to -40°C pdp) and CO2 levels to below the legal permissible limits. Downstream of the adsorption dryer, a catalyst converts carbon monoxide to carbon dioxide, again, to below the legal limits. A final dust filter captures any particulates carried over from the adsorption materials.

The flow rate is easily adjustable from a pressure regulator and monitored by inlet/outlet pressure gauges on the front facia. The BAC-4015 is housed in an extremely strong and robust lockable case for total security.

Features
  • 5 Purification stages
  • CO and CO2 reduction to below legal permissible limits
  • Integral pressure regulator
  • Portable
  • Hours run meter
  • Pneumatic control
  • Use with any compressed air supply

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Domnick Hunter
domnick hunter BA-DME-E
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

The BA-DME range of breathing air purifiers are ideal for point of use multiple personnel protection at medium flow rates.

At the inlet, a general purpose filter removes particles, dirt and aerosols, followed immediately by a high efficiency coalescing filter to reduce oil and water content, an activated carbon filter then removes oil vapour and odours. The fourth stage of purification is an adsorption dryer that reduces the water vapour content of the compressed air (to -40°C pdp) and CO2, levels to below the legal permissible limits. Downstream of the adsorption dryer, a catalyst converts carbon monoxide to carbon dioxide, again, to below the legal limits. A final dust filter captures any particulates carried over from the adsorption materials.

Features
  • 6 Purification stages
  • CO and CO2 reduction to below legal permissible limits
  • Use with any compressed air supply
  • Please note this product is currently only available in Europe.

Sizing and selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Hersteller: Domnick Hunter
domnick hunter BAF-010 & BAF-015
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

BAF010 and BAF015 two stage point of use breathing air purifiers combine high efficiency coalescing pre-filtration with activated carbon oil odour and vapour removal filtration. These filter sets include a pressure regulator/gauge to allow airline pressure adjustment to users' requirements and mounting brackets for ease of installation.

Features
2 Purification stages
Use with any compressed air supply
Pressure gauge

WARNING:
his product will not remove carbon monoxide (CO) or carbon dioxide (CO2).

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Domnick Hunter
domnick hunter BAM 10-70
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

The BAM breathing air purifiers consist of six purification stages mounted on a portable skid for high-capacity multiple personnel breathing air applications.

At the inlet, a water separator removes bulk water, followed immediately by a high efficiency coalescing filter to reduce oil and water content, an activated carbon filter then removes oil vapour and odours. The fourth stage of purification is an adsorption dryer that reduces the water vapour content of the compressed air (to -40°C pdp) and CO2 to below the legal permissible limits. Downstream of the adsorption dryer, a catalyst converts carbon monoxide to carbon dioxide, again, to below the legal limits. A final dust filter captures any particulates carried over from the adsorption materials.

Features
  • 6 Purification stages
  • CO monitor fitted as standard
  • CO and CO2 reduction to below legal permissible limits
  • Air quality 3rd party independently certified, better than the European Pharmacopoeia standard
  • Energy management system fitted as standard
  • Modular, space saving design
  • Use with any compressed air supply

Please note this product is currently only available in Europe.

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Domnick Hunter
domnick hunter BAP-015
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

To facilitate breathing air applications for three personnel, the BAP015 is a portable breathable air purification package consisting of a high efficiency coalescing filter and an activated carbon filter to remove oil vapour and odours. These sets include a pressure regulator/gauge, all mounted in a lightweight, stable framework.

Features
  • 2 Purification stages
  • Integral pressure regulator
  • Portable
  • Use with any compressed air supply
  • Pressure gauge

WARNING:
This product will not remove carbon monoxide (CO) or carbon dioxide (CO2)

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Domnick Hunter
domnick hunter BAS-2010
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

The BAS-2010 is a very robust and weatherproof portable breathing air purifier. Consisting of a high efficiency coalescing filter and an activated carbon filter to remove oil vapour and odours, this purifier includes a pressure regulator / gauge and can facilitate up to four users simultaneously.

Features
  • 2 Purification stages
  • Integral pressure regulator
  • Portable
  • Use with any compressed air supply
  • Pressure gauge

WARNING:
This product will not remove carbon monoxide (CO) or carbon dioxide (CO2).

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Domnick Hunter
domnick hunter BAS-3015
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

The BAS-3015 is a portable breathing air purifier housed in a compact, weatherproof, impact resistant case. Consisting of a general purpose pre-filter, a high efficiency coalescing filter and an activated carbon filter to remove oil vapour and odours, this purifier includes a pressure regulator/ gauge and can facilitate up to five users simultaneously. The BAS-3015 is also available with an optional CO monitor.

Features
  • 3 Purification stages
  • Integral pressure regulator
  • Portable
  • Use with any compressed air supply
  • Integrated CO Monitor (optional)
  • Pressure gauge

WARNING:
This product will not remove carbon monoxide (CO) or carbon dioxide (CO2).

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Zander
Zander BSP-MT
  • Efficient processing units for industrial and medical breathing air
  • Flow rates 8 m³/h to 850 m³/h
  • 16 model sizes
  • Lifetime warranty
  • Pressure dew points down to -40°C
  • Exceeds international guidelines e.g. DIN3188, PHARMACOPÉE EUROPÉENNE, EN12021
  • Lowers operating costs
  • Variable control
  • Optionally with load-dependent control
  • Compressor synchronization control possible
Compressed air heating with precise and extremely fast control up to 120 ° C
  • Dimensions (WxHxD): 262x230x150mm
  • Weight: 7 kg
  • Maximum operating pressure: 16 bar
  • Pressure difference: approx. 50 mbar
  • Max. Flow rate: 850 NL / min (100 ° C)
  • 580 NL / min (120 ° C)
  • Protection class: IP65
  • Outlet connection: G 1/2 "
  • Connection inlet: G 1/2 "
  • Electrical connection: Valve plug
                                                 DIN 43650 Form-A
  • Operating voltage: 230V 50Hz
  • Max. Operating current: 9.72 A
  • Power consumption: 1.5 kW
Downloads