The marked products may be of particular interest to you. They impress by best characteristics, an optimal price performance ratio or a feature which no other product can offer you. Click on the note and find out more!
A reduction of energy consumption up to 60% against traditional heatless desiccant dryers. This enables a payback time of less than 24 months. Even higher savings are possible in partial load situations or when the required pressure dew point is above 0°C.
The pressure dew point is freely adjustable between 5°C and -70°C with no physical changes to the dryer, i.e. like changing an orifice, a nozzle or type of desiccant material in order to reach the desired the dew point.
Antares series compressed air dryers work with high compressed air inlet temperatures of up to 65°C.
Very low cost of ownership, especially due to reduced maintenance costs. Compared to standard adsorption dryers, Antares series compressed air dryers need much less desiccant material. Additionally, some Antares models do not even need regular vessel inspections, the downtime therefore is very low.
Antares helps to keep process safety at a very high level with three integrated high performance filters that are validated according to the demanding ISO12500 standards.
Antares series compressed air dryers are very compact; their footprint is considerably smaller compared to standard hybrid dryers of a similar performance.
Sizing and Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.