Menu

All products from domnick hunter at a glance!

Adsorptionstrockner Kaltregeneration
Hersteller: Domnick Hunter
domnick hunter MIDAS
  • Heatless regenerating adsorption dryer
  • Volume flow 5.1 m³/h - 34 m³/h
  • Reliability of the plant - trouble-free operation of machines and processes that run on compressed air
  • Dry and clean air for all applications
  • No contamination of products / processes / plants
  • Low maintenance costs - Reduction or elimination of unexpected / unscheduled asset maintenance and improved budget control
  • Lower energy consumption of the system
  • Low environmental impact through the plant
  • Conformity with legal regulations - eg. B. Supporting compliance with regulations for the food, beverage and pharmaceutical industries
  • Removes oil, water and dirt up to 0.01 μm
  • Reduces dew point to -40°C
  • (-70°C on request)
Downloads
Adsorptionstrockner Kaltregeneration
Hersteller: Domnick Hunter
domnick hunter PNEUDRI MX
  • Heatless regenerating adsorption dryer
  • Volume flow 408 m³/h to 6120m³/h
  • Reliability of the plant - trouble-free operation of machines and processes that run on compressed air
  • Dry and clean air for all applications
  • No contamination of products / processes / plants
  • Low maintenance costs - Reduction or elimination of unexpected / unscheduled asset maintenance and improved budget control
  • Lower energy consumption of the system
  • Low environmental impact through the plant
  • Conformity with legal regulations - eg. B. Supporting compliance with regulations for the food, beverage and pharmaceutical industries
  • Dew point -40°C or optional -70°C
  • * ATEX compliant option available.
  • For hazardous areas is a fully pneumatic and ATEX compliant
  • PNEUDRI version available.
  • ATEX Directive 94/9 / EC,
  • Group II, category 2GD, T6.
Adsorptionstrockner Kaltregeneration
Hersteller: Domnick Hunter
domnick hunter PNEUDRI MXLE
  • Heatless regenerating adsorption dryer with vacuum technology
  • Flow rate 408 m³/h to 2040 m³/h
  • Reliability of the plant - trouble-free operation of machines and processes that run on compressed air
  • Dry and clean air for all applications
  • No contamination of products / processes / plants
  • Low maintenance costs - Reduction or elimination of unexpected / unscheduled asset maintenance and improved budget control
  • Lower energy consumption of the system
  • Low environmental impact through the plant
  • Conformity with legal regulations - eg. B. Supporting compliance with regulations for the food, beverage and pharmaceutical industries
Downloads
Aktivkohleadsorber
Hersteller: Domnick Hunter
domnick hunter OVR
  • Oil vapor adsorber - activated carbon adsorber OVR
  • Volume flow 314 m³ / h to 3188 m³ / h
  • Guaranteed air quality
  • Suitable for use with oil-lubricated and oil-free compressors
  • Provided air quality complies with ISO 8573-1, Class 0 or ISO 8573-1, Class 1 for total oil content
  • Factory-wide or application-specific oil mist separation
  • Compliant with FDA Title 21 and exempted from EC Regulation 1935
  • Unique filling method for the adsorbent
  • Modular design
  • Simple, easy maintenance
  • Residual oil content <0.003 mg / m 3 (activated carbon at 20 ° C and 7 bar g)
  • Operating differential pressure 350 mbar
Downloads
Kohlendioxid Politursysteme
Hersteller: Domnick Hunter
PCO2 - Carbon Dioxide Quality Incident Protection Systems
  • CO2 polishing systems for the carbonated beverage industry
  • Comprehensive 6-stage polishing technology
  • Easy installation
  • compact design
  • Low maintenance
  • Gravure Case
  • Meets ISO9001: 2000 standards
  • Materials of construction are subject to independent reviews to comply with FDA Code 21 CFR federal regulation
  • Carbon Dioxide quality guarantees efficiency in removing combinations of potential impurities and contaminants
  • The protection against impurities, which are known to create taste defects in beverages, helps to avoid product misprints and protects the reputation of the bottling companies
  • International sales and services support the experience of more than 20 years

Hersteller: Domnick Hunter
domnick hunter BAC-4015
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

The BAC-4015 is a fully pneumatic, portable breathing air purifier designed to provide complete protection for up to four personnel.

At the inlet, a high efficiency coalescing filter reduces oil and water content, an activated carbon filter then removes oil vapour and odours. The third stage of purification is an adsorption dryer that reduces the water vapour content of the compressed air (to -40°C pdp) and CO2 levels to below the legal permissible limits. Downstream of the adsorption dryer, a catalyst converts carbon monoxide to carbon dioxide, again, to below the legal limits. A final dust filter captures any particulates carried over from the adsorption materials.

The flow rate is easily adjustable from a pressure regulator and monitored by inlet/outlet pressure gauges on the front facia. The BAC-4015 is housed in an extremely strong and robust lockable case for total security.

Features
  • 5 Purification stages
  • CO and CO2 reduction to below legal permissible limits
  • Integral pressure regulator
  • Portable
  • Hours run meter
  • Pneumatic control
  • Use with any compressed air supply

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Domnick Hunter
domnick hunter BA-DME-E
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

The BA-DME range of breathing air purifiers are ideal for point of use multiple personnel protection at medium flow rates.

At the inlet, a general purpose filter removes particles, dirt and aerosols, followed immediately by a high efficiency coalescing filter to reduce oil and water content, an activated carbon filter then removes oil vapour and odours. The fourth stage of purification is an adsorption dryer that reduces the water vapour content of the compressed air (to -40°C pdp) and CO2, levels to below the legal permissible limits. Downstream of the adsorption dryer, a catalyst converts carbon monoxide to carbon dioxide, again, to below the legal limits. A final dust filter captures any particulates carried over from the adsorption materials.

Features
  • 6 Purification stages
  • CO and CO2 reduction to below legal permissible limits
  • Use with any compressed air supply
  • Please note this product is currently only available in Europe.

Sizing and selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Hersteller: Domnick Hunter
domnick hunter BAF-010 & BAF-015
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

BAF010 and BAF015 two stage point of use breathing air purifiers combine high efficiency coalescing pre-filtration with activated carbon oil odour and vapour removal filtration. These filter sets include a pressure regulator/gauge to allow airline pressure adjustment to users' requirements and mounting brackets for ease of installation.

Features
2 Purification stages
Use with any compressed air supply
Pressure gauge

WARNING:
his product will not remove carbon monoxide (CO) or carbon dioxide (CO2).

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Domnick Hunter
domnick hunter BAM 10-70
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

The BAM breathing air purifiers consist of six purification stages mounted on a portable skid for high-capacity multiple personnel breathing air applications.

At the inlet, a water separator removes bulk water, followed immediately by a high efficiency coalescing filter to reduce oil and water content, an activated carbon filter then removes oil vapour and odours. The fourth stage of purification is an adsorption dryer that reduces the water vapour content of the compressed air (to -40°C pdp) and CO2 to below the legal permissible limits. Downstream of the adsorption dryer, a catalyst converts carbon monoxide to carbon dioxide, again, to below the legal limits. A final dust filter captures any particulates carried over from the adsorption materials.

Features
  • 6 Purification stages
  • CO monitor fitted as standard
  • CO and CO2 reduction to below legal permissible limits
  • Air quality 3rd party independently certified, better than the European Pharmacopoeia standard
  • Energy management system fitted as standard
  • Modular, space saving design
  • Use with any compressed air supply

Please note this product is currently only available in Europe.

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Domnick Hunter
domnick hunter BAP-015
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

To facilitate breathing air applications for three personnel, the BAP015 is a portable breathable air purification package consisting of a high efficiency coalescing filter and an activated carbon filter to remove oil vapour and odours. These sets include a pressure regulator/gauge, all mounted in a lightweight, stable framework.

Features
  • 2 Purification stages
  • Integral pressure regulator
  • Portable
  • Use with any compressed air supply
  • Pressure gauge

WARNING:
This product will not remove carbon monoxide (CO) or carbon dioxide (CO2)

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Domnick Hunter
domnick hunter BAS-2010
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

The BAS-2010 is a very robust and weatherproof portable breathing air purifier. Consisting of a high efficiency coalescing filter and an activated carbon filter to remove oil vapour and odours, this purifier includes a pressure regulator / gauge and can facilitate up to four users simultaneously.

Features
  • 2 Purification stages
  • Integral pressure regulator
  • Portable
  • Use with any compressed air supply
  • Pressure gauge

WARNING:
This product will not remove carbon monoxide (CO) or carbon dioxide (CO2).

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Hersteller: Domnick Hunter
domnick hunter BAS-3015
Hazardous vapours, gases and fumes can be released at various stages within manufacturing applications. Whether the risk is from noxious fumes, particulate or contamination from a compressed air system, effective respiratory protection for the user is essential.

In compressed air fed systems, ambient air is drawn into the compressor, therefore any contaminants present in the ambient air, plus those introduced by the compressor itself, will be present unless removed by a purification system.

The BAS-3015 is a portable breathing air purifier housed in a compact, weatherproof, impact resistant case. Consisting of a general purpose pre-filter, a high efficiency coalescing filter and an activated carbon filter to remove oil vapour and odours, this purifier includes a pressure regulator/ gauge and can facilitate up to five users simultaneously. The BAS-3015 is also available with an optional CO monitor.

Features
  • 3 Purification stages
  • Integral pressure regulator
  • Portable
  • Use with any compressed air supply
  • Integrated CO Monitor (optional)
  • Pressure gauge

WARNING:
This product will not remove carbon monoxide (CO) or carbon dioxide (CO2).

Sizing and Selection
To ensure quoted air purity performance is met, a breathing air system must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads

Druckluftfilter
Hersteller: Domnick Hunter
domnick hunter OIL-X
  • New series of compressed air thread filters
  • Flow rates from 36 m³/h to 3600 m³/h
  • Connection from G 1/4" to G 4"
  • Max. Operating pressure 16 bar gauge (20 bar gauge AA / AO dry particle or ACS oil mist separation)
  • Compressed air quality validated according to ISO 12500-1: 2007 and ISO 8573-1: 2010 by independent experts
  • Reliable separation of solids, oil and water aerosols and oil vapors
  • Guaranteed compressed air quality in compliance with maintenance recommendations
  • Increased machine utilization and productivity due to less downtime, less maintenance costs
  • Constant guarantees lowest differential pressures throughout the lifetime of the element with a high dirt holding capacity
  • Low differential pressures reduce operating costs and ensure economical operation
  • Optimal price-performance ratio of operating and wearing parts costs
  • 10-year guarantee on the filter housing
  • Permanently high energy savings and thus improved CO2 balance for your company
  • Lowest differential pressure in the market of only 125 mbar
Druckluftfilter
Hersteller: Domnick Hunter
OIL-X Flanged Filter
  • Submicron filter with flange connection for large flow rates
  • Flow rates from 2232 m³ h to 31248 m³/h
  • Flange connection from DN 80 to DN 300
  • Standard range up to 16 bar g (232 psi g)
  • Coalescence filter validated according to ISO 12500-1
  • The resulting air quality complies with all versions of ISO 8573-1
  • The performance has been verified by the independent testing laboratory Lloyds Register
  • Design according to ASME VIII Div 1 (non-U)
  • Reliable separation of solids, oil and water aerosols and oil vapors
  • Increased machine utilization and productivity due to less downtime, less maintenance costs
  • Quick and easy maintenance thanks to NT Easy-Fit element insert
  • Constant low differential pressures throughout the life of the element with high dirt holding capacity thanks to pleated element design
  • Optimal price-performance ratio of operating and wearing parts costs
  • Guaranteed compressed air quality in compliance with maintenance recommendations
  • Stainless steel versions also available
Hochdruckfilter
Hersteller: Domnick Hunter
High Pressure Filter - Series OIL-X IP50 ADVANTAGE
  • Medium pressure filter for applications from 20 barg to 50 barg
  • Meets or exceeds the requirements of the International Standard for Air Quality Delivered in all editions of ISO8573-1 for compressed air quality
  • Merging filters fully tested in accordance with ISO12500-1
  • Power independently validated by the Lloyds Register
  • Elimination of oil, water and dirt - Available in six filtration lines
  • Ideal for Food / Drink / Medicines / P.E.T. applications
  • FDA Title 21
  • EC1935 - Exempted 2004
  • Trouble-Free and High Performance - Quality Oil XPLUS ADVANTAGE
  • 10 years insure on the filter housing
  • Convenience of installation - compact accommodation design
  • Port options - BSPP / NPT - also available weld flange kits
  • Filter up to 350 bar on request.
Hochdruckfilter
Hersteller: Domnick Hunter
High Pressure Filter - Series GH 100 and GH 350
  • High pressure filter for compressed air up to 100 bar or up to 350 bar
  • Volume flow 188 m³/h to 2787 m³/h or 365 m³/h to 4261 m³/h
  • Connection sizes G1/2 to G 11/2
  • optimal for high pressure ranges up to 100 bar
  • Pleating with a 4 times higher element surface compared to conventionally wound construction
  • with double O-ring seal to protect the housing threads from dirt and moisture from the outside
  • Ready filter including filter element and manual drain
  • Optionally available without manual drain
Downloads
Stickstoffgeneratoren
Hersteller: Domnick Hunter
NitroSource
  • Energy saving technology accurately adjusts the amount of input compressed air to reduce compressed air consumption and reduce energy and cost to the amount and purity of nitrogen produced
  • Cost-effective maintenance, long service life
  • The carbon molecular sieve, the "heart" of the generator, is the more efficient form of nitrogen production. It ensures a very long generator life and significant savings in maintenance costs.
  • Compliant with industry standards, food and drug safe in accordance with European regulations (EIGA) and the US Food & Drugs Administration (FDA Article 21) as well as the Pharmacopoeia
  • Gas Quality Control
  • Flow regulator ensures correct pressure and flow
  • Integrated oxygen analyzer permanently measures the gas purity
  • Exhaust Gas Bypass Valve automatically discharges gas that does not comply with specifications, ensuring product quality through guaranteed gas quality
  • Regulated inlet and outlet pressure prevents damage to the generator and the application
  • Electronic control system 100% management of all critical generator functions
  • Remote monitoring allows connection to existing remote management control systems and distributed generator control to control and track gas parameters from a central location
  • Supply uncomplicated expandable. Just add extra generators as the needs of your applications grow.
Downloads
Stickstoffgeneratoren
Hersteller: Domnick Hunter
MIDIGAS
  • Can be operated with a standard factory compressed air supply
  • Provides 5% to 10 ppm oxygen without any additional cleaning required
  • Available in 3 models with different flow rates and purities
  • Automatic economy mode
  • Integrated oxygen analyzer for continuous monitoring of purity
  • Digital and analogue outputs for remote monitoring
  • alarm functions
  • Easy to use control interface
  • Compact design
  • Modular concept
Filterelemente
Hersteller: Domnick Hunter
oil-xplus advantage
  • Filter elements for the filter series Oil-Xplus
  • Min. Operating temperature range 1.5°C - 66°C
  • Meets and exceeds ISO 8573-1 tested to ISO 12500-1
  • Lowest total cost
  • Energy savings of 49% over the original OIL XPLUS element
  • Lower environmental impact reduces CO2 emissions
  • Guaranteed and lasting high air quality
  • Designed to retrofit original OIL-XPlus filter housings
  • Replaces standard AO, AA and AO-TS, AA-TS rank elements
  • Maximum operating temperature 100°C
Downloads
Hersteller: Domnick Hunter
Baureihe ausgelaufen
Sterile filter housing HBA
  • Flow efficient range of air / gas housings
  • Demi (TRUESEAL) and K-40¨ (226) housing sizes
  • Designed to maximize flow and minimize
           pressure drop
  • Designed specifically for the food and
  • beverage industry
  • STANDARD product
- Economy and short delivery lead times
  • PLUS product
- Available in 4 different vessel classes:
- Standard CE, Atex, High Pressure and Oxygen service
- Standard, sanitary and sanitary electropolished surface finishes available
- A number of inlet / outlet port connections
- Wide range of vent and drain options
Downloads
Prozess- Filter
Hersteller: Domnick Hunter
Sterile filter elements HIGH FLOW BIO-X
  • ​High flowing hydrophic PTFE impregnated media
  • Fully validated by aerosolized bacterial and viral challenge
  • Stainless steel inner core
  • 100% integrity testable by Valairdata 3 aerosol challenge
  • Reduce system size and reduced total cost of ownership.
  • Provides complete process security
  • Strong and robust for extended service life
  • Guaranteed performance in-situ
Downloads
Prozess- Filter
Hersteller: Domnick Hunter
Vent Filter Housing VBV and VA
  • For ventilation of storage and transport containers
  • Housing lock by triple bayonet with knurled screw
  • Optionally available with heating jacket or steam jacket
  • Made of high quality stainless steel
  • Available in almost all connection shapes and sizes
  • Flow-optimized conception without corners and edges
  • Can be used with sterile filter elements
  • Can be used with stainless steel filter elements of the HFSS and HFS series and polypropylene elements of the PEPLYN AIR series
Downloads
Prozess- Filter
Hersteller: Domnick Hunter
Steam filter elements
  • 316L stainless steel filter cartridges
  • Exceptionally high flow rates
  • Available in compliance with 3A Standard 609-03 (culinary grade) 1 micron 
  • High dirt holding capacity
  • ‘JUMBO’ filter  configuration ensures maximum utilization of pipework capacity
Downloads
Hersteller: Domnick Hunter
Baureihe ausgelaufen
domnick hunter gl-plus
  • Compressed air thread filter
  • Flow rates from 36 m³/h to 2232 m³/h
  • Connection from G 1/4 "to G 3"
  • Compressed air quality validated according to ISO 12500-1: 2007 and ISO 8573-1: 2010 by independent experts
  • Reliable separation of solids, oil and water aerosols and oil vapors
  • Guaranteed compressed air quality in compliance with maintenance recommendations
  • Increased machine utilization and productivity due to less downtime, less maintenance costs
  • Constant guarantees lowest differential pressures throughout the lifetime of the element with a high dirt holding capacity
  • Low differential pressures reduce operating costs and ensure economical operation
  • Optimal price-performance ratio of operating and wearing parts costs
  • 10-year guarantee on the filter housing
  • Permanently high energy savings and thus improved CO2 balance for your company
Wasserabscheider
Hersteller: Domnick Hunter
domnick hunter WSP Water Separator
  • Water separator series OIL-X 
  • Flow rates from 36 m³ / h to 25920 m³ / h
  • Connection from G 1/4 "to DN 300
  • Operating pressure 16 bar ü (20 bar ü with manual drain for thread filters)
  • Tested to ISO 8573.9
  • Independent performance review by Lloyds Register
  • high efficiency 99%
  • optimal price / performance ratio
  • minimal maintenance
  • tested, patented design
  • high flow rates
  • very low differential pressure
  • automatic steam trap as standard
  • Removal of rust particles and solids
  • Diverts large quantities of water
  • Aftercoolers or before dryers
  • With automatic drain valve
  • BSPP or DN flange connection
  • Filters with separate acceptances are available at extra cost.
  • Lifetime warranty
Downloads

Öl-Wassertrenner
Hersteller: Domnick Hunter
domnick hunter ES 2000 Series
  • Single piece units – reduce overall footprint
  • Robust, corrosion resistant, polyethylene construction, includes ribbing for extra strength
  • Large centrifugal inlet chamber provides effective venting of compressed air energy, whilst multiple  inlet ports and four inlet chamber positions simplify installation
  • Large, easily cleaned primary settlement chamber  for the accumulation and removal of dirt particles
  • Large main tank increases settlement time and reduces oil carryover to carbon filter stage
  • Large internal galleries reduce risk of an internal blockage and simplify maintenance
  • Oil absorbing pre-filter(s) protect carbon stage from bulk contamination  Large carbon stage for increased contact time, improving water quality and extending carbon life
  • High specification carbon for improved service intervals
  • Adjustable oil outlet funnel for the efficient removal of separated oil
  • Sealed external oil container for easy oil disposal
  • Sample tap removes need to disconnect outlet piping when obtaining a test sample
Downloads