Menu

ADSORPTION TECHNOLOGY

Note:

The marked products may be of particular interest to you. They impress by best characteristics, an optimal price-performance ratio or a feature which no other product can offer you. Click on the note and find out more!
 
Adsorptionstrockner Kaltregeneration
Adsorptionstrockner Warmregeneration
Aktivkohleadsorber
Pure-PRo Compressed air system optimization
  • PN16
  • 2 voltage options 115VAC or 230VAC 50 / 60Hz
  • Medium temperature 1 to 100 ° C
  • Ambient temperature up to 50 ° C
  • Illuminated LCD display
  • Seven-day programs (up to 16 times a day)
  • Valve maintenance possible
  • remote control
  • Connections G1 and G2
  • Closing time 30 seconds / 90 °
Downloads
Adsorptionstrockner Kaltregeneration
Hersteller: Zander
Zander CDAS - CLEAN DRY AIR SYSTEM
  • New Series
Fully automatic heatless regenerating adsorption dryer.
Volume flow 55 m³/h to 300 m³/h
  • EST - energy saving technology
  • Big screen with lots of real time information
  • High strength desiccant
The cartridges are used in blizzard with
high strength desiccant filled with a life of
5 years for aconsistent drying, regeneration and dew point temperature ensures.
  • Pre assembled filters
The new filters in the OIL-X series offer performance certified to ISO 8573-1
Validation according to ISO 12500
  • Screwed lid
The bolted lid allows easy replacement of the desiccant cartridge.
  • Adjustable flushing pressure
The purging air can be easily adjusted to the minimum operating pressure without special tools.
  • Corrosion resistant column
With 10 years warranty to ensure a long service life.
  • Internal flow paths with full passage
With optimized flow management to reduce pressure drop.
  • Cylinder valve system with full passage
Valves with low pressure loss ensure an unimpeded air flow and low back
pressure, while rugged cylinders extend service intervals.
  • Base plate designed for pallet trucks
Enables a simple, time saving installation.
Alternatively with oil vapor adsorber (OFAS series)
Adsorptionstrockner Kaltregeneration
Hersteller: Zander
Zander OFAS - OIL FREE AIR SYSTEM
  • New Series
Fully automatic heatless regenerating adsorption dryer with oil vapor removal
Volume flow 55 m³/h to 300 m³/h
  • EST - energy saving technology
  • Big screen with lots of real time information
  • High strength desiccant
The cartridges are used in blizzard with
high strength desiccant filled with a life of
5 years for aconsistent drying, regeneration and dew point temperature ensures.
  • Pre assembled filters
The new filters in the OIL-X series offer performance certified to ISO 8573-1
Validation according to ISO 12500
  • Screwed lid
The bolted lid allows easy replacement of the desiccant cartridge.
  • Adjustable flushing pressure
The purging air can be easily adjusted to the minimum operating pressure without special tools.
  • Corrosion resistant column
With 10 years warranty to ensure a long service life.
  • Internal flow paths with full passage
With optimized flow management to reduce pressure drop.
  • Cylinder valve system with full passage
Valves with low pressure loss ensure an unimpeded air flow and low back
pressure, while rugged cylinders extend service intervals.
  • Base plate designed for pallet trucks
Enables a simple, time saving installation.
Adsorptionstrockner Kaltregeneration
Hersteller: Zander
Zander KA-MT - Generation 2
  • Fully automatic heatless regenerating adsorption dryer with oil vapor removal
  • Volume flow from 8 m³/h to 940 m³/h
  • Efficient up to a pressure dew point of -70 ° C
  • Cleaning up to residual oil contents of 0.003 mg / m³
  • Flow rates up to 940 m³ / h (suction capacity of the compressor when compressed to 7 bar)
  • Compressed air can be dried according to pressure dew point from -25 ° C to -70 ° C
  • Ready to use preparation unit with activated carbon stage including prefilter and dustfilter
  • heatless regenerated, with multitronic plus control
  • Optionally with dew point control
  • Mains voltage 230 V, 50-60 Hz
  • Residual oil content up to 0.003 mg / m³
Downloads
Adsorptionstrockner Kaltregeneration
Hersteller: Zander
Zander KE(A)-MT
  • Heatless regenerating adsorption dryers for volume flows from 1200 to 6100 m³ / h
  • Stainless steel sieve plates on the wet side
  • High quality desiccant
  • Separately controlled main and blow-off valves
  • Generously dimensioned and tight-fitting non-return valves.
Adsorptionstrockner Kaltregeneration
Hersteller: Domnick Hunter
domnick hunter MIDAS
  • Heatless regenerating adsorption dryer
  • Volume flow 5.1 m³/h - 34 m³/h
  • Reliability of the plant - trouble-free operation of machines and processes that run on compressed air
  • Dry and clean air for all applications
  • No contamination of products / processes / plants
  • Low maintenance costs - Reduction or elimination of unexpected / unscheduled asset maintenance and improved budget control
  • Lower energy consumption of the system
  • Low environmental impact through the plant
  • Conformity with legal regulations - eg. B. Supporting compliance with regulations for the food, beverage and pharmaceutical industries
  • Removes oil, water and dirt up to 0.01 μm
  • Reduces dew point to -40°C
  • (-70°C on request)
Downloads
Adsorptionstrockner Kaltregeneration
Hersteller: Domnick Hunter
domnick hunter PNEUDRI MX
  • Heatless regenerating adsorption dryer
  • Volume flow 408 m³/h to 6120m³/h
  • Reliability of the plant - trouble-free operation of machines and processes that run on compressed air
  • Dry and clean air for all applications
  • No contamination of products / processes / plants
  • Low maintenance costs - Reduction or elimination of unexpected / unscheduled asset maintenance and improved budget control
  • Lower energy consumption of the system
  • Low environmental impact through the plant
  • Conformity with legal regulations - eg. B. Supporting compliance with regulations for the food, beverage and pharmaceutical industries
  • Dew point -40°C or optional -70°C
  • * ATEX compliant option available.
  • For hazardous areas is a fully pneumatic and ATEX compliant
  • PNEUDRI version available.
  • ATEX Directive 94/9 / EC,
  • Group II, category 2GD, T6.
Adsorptionstrockner Kaltregeneration
Hersteller: Domnick Hunter
domnick hunter PNEUDRI MXLE
  • Heatless regenerating adsorption dryer with vacuum technology
  • Flow rate 408 m³/h to 2040 m³/h
  • Reliability of the plant - trouble-free operation of machines and processes that run on compressed air
  • Dry and clean air for all applications
  • No contamination of products / processes / plants
  • Low maintenance costs - Reduction or elimination of unexpected / unscheduled asset maintenance and improved budget control
  • Lower energy consumption of the system
  • Low environmental impact through the plant
  • Conformity with legal regulations - eg. B. Supporting compliance with regulations for the food, beverage and pharmaceutical industries
Downloads
Adsorptionstrockner Warmregeneration
Hersteller: Hiross
Tandem-Dryer (ATT)
  • High performance compressed air drying system with revolutionary tandem technology
  • Flow rate 2.5 m³/min. up to 34 m³/min. (Larger volume flows on request)
  • Lower operating costs compared to conventional cold and warm regenerating adsorption dryers (lower purge air requirement and lower energy consumption of the heater).
  • Reduced maintenance costs due to lower desiccant filling with increased service life.
  • Constant dew point performance - no peaks above the setpoint.
  • "Dew point control function" for seasonal operation (optional bypass line).
  • Additional energy savings at partial load - (dew point dependent change).
  • Compact overall dimensions - small footprint - space savings.
  • Technology for compressed air and nitrogen can be used
  • Dew point adjustable between -70°C and +3°C
  • Reduced maintenance costs due to lower desiccant filling with increased service life
Adsorptionstrockner Warmregeneration
Hersteller: Zander
Zander WVM
  • Adsorption dryer, heat regenerated
  • Volume flow 1500 m³/h to 14500 m³/h (other sizes on request)
  • Fully automatic adsorption dryer with vacuum regeneration for drying compressed air
  • Warm regeneration without purging air
  • Dew point control incl.
  • Zander Dryer Memory Control (ZDMC)
  • Low Energy System
  • Two-layer filling
  • Active heating in the vacuum range
  • Low regeneration temperature
  • Intense cooling
  • No compressed air consumption
  • Regeneration without purging air
  • Pressure build up on the wet side
  • dew point controller
  • Switching without tip in the dew point
  • Safe pressure dew points down to -70°C
  • function messages
  • Alternative energies z. As steam or hot water
  • Various options for optimal adaptability to the needs of the customer
Hochdruckadsorber
Hersteller: Zander
Zander HDK-MT
  • Adsorption dryer high pressure
  • Ecodry HDK-MT 100 and 350 bar
  • high-quality piston valves from mass production combined in one block, individually interchangeable, with separate function for:
  • Adsorption
  • Regeneration
  • Pressure build-up
  • Connection of the valve combinations with the adsorbers to a compact unit
  • Both sides releasable closure of the container
  • Self-cleaning drainage system in the lower inlet area of the adsorber
  • The high-quality desiccant is fixed by an effective bias in the adsorber
Downloads
Aktivkohleadsorber
Hersteller: Domnick Hunter
domnick hunter OVR
  • Oil vapor adsorber - activated carbon adsorber OVR
  • Volume flow 314 m³ / h to 3188 m³ / h
  • Guaranteed air quality
  • Suitable for use with oil-lubricated and oil-free compressors
  • Provided air quality complies with ISO 8573-1, Class 0 or ISO 8573-1, Class 1 for total oil content
  • Factory-wide or application-specific oil mist separation
  • Compliant with FDA Title 21 and exempted from EC Regulation 1935
  • Unique filling method for the adsorbent
  • Modular design
  • Simple, easy maintenance
  • Residual oil content <0.003 mg / m 3 (activated carbon at 20 ° C and 7 bar g)
  • Operating differential pressure 350 mbar
Downloads
Aktivkohleadsorber
Hersteller: Zander
Zander AKM
The AKM range of activated carbon adsorbers are designed to purify pre-dried industrial compressed air down to a remaining oil content of 0,003 mg/m³. The units are compact and can be installed either free-standing or on a fram (AKM10-95) or wall mounted (AKM1-8). They come equipped with integrated high performance after filtration and are capable of volume flows up to 940 m³/h in a system operating at 7 barg (100 psig).

Features
Volume flows up to 86 m³/h @ 7 barg (100 psig)
High performance after filters installed as standard
Start-up devices available as an option
Oil indicator installed

Benefits
High performance oil vapour removal for highest quality air
Compact and space saving
Installed high performance after-filter protects downstream equipment

Operation
Pre-dried compressed air flows from top to bottom through a single aluminium profile chamber containing activated carbon. Any remaining oil aerosols and oil vapours including odours and tastes are removed by the active surface area of the highly porous activated carbon to produce high quality, clean compressed air. Finally, the treated compressed air exits via the validated after-filter into the downstream compressed air network. Using an oil-indicator tube, quality checks can be carried out periodically.

Sizing and Selection
Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

Please note: The lifetime of the activated carbon filling can vary and is dependent on the contamination type and quantity and also on the humidity of the compressed air.

For more information or a detailed discussion about your specific requirements please contact pure!
Downloads
Aktivkohleadsorber
Hersteller: Zander
Zander AK
The AK 120-600 range of activated carbon adsorbers are designed to purify pre-dried industrial compressed air down to a remaining oil content of 0,003mg/m³. The units can be installed free-standing or on a frame. They come equipped with oil indicator and pressure gauge and are capable of volume flows up to 6100 m³/h in a system operating at 7 barg (100 psig). Matching pre- and after-filters have to be ordered separately.

Features
Volume flows up to 6100 m³/h @ 7 barg (100 psig)
Maximum operating pressure 10 barg (145 psig)
Oil indicator, pressure gauge and after-filter included

Operation
Pre-dried compressed air flows from top to bottom through a single vessel containing activated carbon. Any remaining oil aerosols and oil vapours including odours and tastes are removed by the active surface area of the highly porous activated carbon to produce high quality, clean compressed air. Using an oil-indicator tube, quality checks can be carried out periodically.

Sizing and Selection
Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

Please note: The lifetime of the activated carbon filling can vary and is dependent on the contamination type and quantity and also on the humidity of the compressed air.

For more information or a detailed discussion about your specific requirements please contact pure!
Kartuschenadsorber
Hersteller: Zander
Zander MDK
  • Point of use dryer MDK series (KTM)
  • Pressure dew point -40°C
  • Controllable by test indicator
  • No energy consumption during operation
  • Cartridge system
  • Filling with molecular sieve 4A
  • The filter with cartridge insert absorbs water vapor from compressed air and nitrogen
  • compressed gas for pressure dew points down to -40°C
  • Regenerable by heating
Downloads
Kohlendioxid Politursysteme
Hersteller: Domnick Hunter
PCO2 - Carbon Dioxide Quality Incident Protection Systems
  • CO2 polishing systems for the carbonated beverage industry
  • Comprehensive 6-stage polishing technology
  • Easy installation
  • compact design
  • Low maintenance
  • Gravure Case
  • Meets ISO9001: 2000 standards
  • Materials of construction are subject to independent reviews to comply with FDA Code 21 CFR federal regulation
  • Carbon Dioxide quality guarantees efficiency in removing combinations of potential impurities and contaminants
  • The protection against impurities, which are known to create taste defects in beverages, helps to avoid product misprints and protects the reputation of the bottling companies
  • International sales and services support the experience of more than 20 years
Adsorptionstrockner Kaltregeneration
Hersteller: Zander
Zander K-MT - Generation 3
​Fully automatic heatless regenerating adsorption dryer
Volume flow from 8 m³/h to 940 m³/h
Efficient up to a pressure dew point of -70 ° C
Ready to connect adsorption dryer including prefilter and dustfilter 
Optionally available with mounted dew point control
Multitronic plus control
Pressure dew point from -25°C to -70°C
Ready to use adsorption dryer for a pressure dew point of
Standard -40°C.
Higher capacities and operating pressures, inlet temperatures or lower pressure dew points on request.
Downloads